Recessed Wall Luminaires

Recessed step lights guiding a path along a stone wall at night

Built Into the Wall.
Built to Guide.

Why this collection?

01Purpose-built for steps, pathways, and wall washing

02IK09/IK10 impact-rated for stairwells and public spaces

03Output as low as 0.2W — marks a step without lighting the room

041–10V, PWM, DALI, or non-dimmable

See Recessed Wall Luminaires Collection

Collection Range

Round / Square

The standard recessed profile — compact and flush
General accent and step lighting
Multiple diameters and wattages

Stair / Pathway

Built for risers, steps, and low-level path marking
Low output by design — as low as 0.2W
Impact-rated for foot traffic

Wall Washer — Recessed

Wider, more diffused beam than round/square
Grazes a full wall, not a single point
Used on feature walls and façade bases

RGBW — Recessed Wall

Full-color output, same platform
For seasonal, event, or branded moments
Same control system as the rest of a site

Materials

#12 die-cast powder-coated aluminum

Consistent surface appearance
Balances cost, castability, color retention
The standard casting route for most fixtures

Die-cast aluminum

Casting alloy chosen for strength and detail
Highly resistant to oxidation
Used for more sculpted shapes

Extruded aluminum

Structural alloy, extruded, not cast
High resistance to oxidation
Used for straight, linear profiles

Stainless steel hardware and select housings are used throughout for maximum corrosion resistance.

Manufacturing: One Facility, Start to Finish

Every aluminum housing in this collection begins as raw metal, not a finished shape.

Die-casting, step by step

Melting

Aluminum ingots (12# / ADC12-grade alloy) melted in a furnace

Injection

Molten aluminum is injected under high pressure into a hardened steel mold

Cooling

The casting solidifies within seconds under continued pressure

Trimming

Excess flash along the mold seams is removed

Machining

Mounting points and optic seats are CNC-machined to tolerance

Finishing

Sanded, sealed, and powder-coated in the specified color

Testing & Quality Control

Every fixture is tested before it leaves the facility — not sampled, not spot-checked.

Incoming inspection

Raw materials and components are checked before production.

In-process inspection

Fixtures are checked at each production stage.

Final inspection

Every finished unit is inspected before it ships.

In-house lab testing

IP rating test

Confirms dust and water sealing meets its published rating, critical for a fixture recessed into the ground

Thermal shock test

Confirms housings and seals hold under rapid temperature swings

Environmental stress test

Simulates long-term outdoor exposure in temperature and humidity chambers

Optics testing

Confirms beam angle and output match spec

Materials & product testing

Verifies component strength and finish durability

Electrical safety test

Confirms wiring and insulation meet safety requirements

What sets us apart

Vertical Integration

Running the full process in-house — tooling, casting, machining, electronics, and finishing — rather than distributing it across outside subcontractors delivers three concrete advantages:

Get Specification Support

Machined flange, reamed bolt holes, and a seated gasket — tolerance and finish quality visible in a single frame.

Cutting our own tooling in-house means no waiting on an outside toolmaker between order and first unit.

Hundreds of housings from one mold — dimensional repeatability is what holds a spec to the five-hundredth unit.

Dimming Options

0–10V

Simple analog dimming

PWM

Flicker-free, common on low-wattage models

DALI

Addressable, standard for smart buildings

Non-dimmable

Where simplicity is the priority

Installation Environments

Stairwells

Step and riser lighting, interior and exterior.

Pathways

Low-level guidance recessed into walls or curbs.

Feature walls

Wall washer models for grazing large surfaces.

Wet or exposed sites

IP65-rated for rain and irrigation exposure.

High-traffic public spaces

IK09/IK10 rated for regular contact.

Questions & Answers

Round and square models are the standard recessed profile — compact, flush, and suited to general accent and step lighting. Wall washer models use a wider, more diffused beam to grace a full wall or façade rather than mark a single point.

Yes. The collection is IP65-rated for rain and irrigation exposure and built for continuous outdoor installation in walls, steps, curbs, and pathways.

IK09 and IK10 are impact-resistance ratings. Fixtures rated to this level withstand regular foot traffic and contact in stairwells, pathways, and other high-traffic public spaces without damage to the lens or housing.

Yes. The collection supports 0–10V, DALI, and PWM dimming, or can be specified non-dimmable where simplicity is the priority.

Die-cast aluminum is used for more sculpted shapes and chosen for strength and detail. Extruded aluminum is a structural alloy used for straight, linear profiles. #12 die-cast powder-coated aluminum balances cost, castability, and long-term color retention across the standard collection.

Output runs as low as 0.2W — enough to mark a step or edge without lighting the surrounding room. Higher-output wall washer and feature-wall models are specified separately for larger surfaces.

Explore Collection, Applications, and Specification Details

Built Into the Wall.Built to Guide.